Dyson WashG1 wet floor cleaner (Ultra Blue/Matte Black)
Highly absorbent, counter-rotating rollers
Two individually powered rollers counter-rotate while a pulse-modulated pump distributes water evenly across 26 precisely positioned hydration points, along the full width of each roller.
Each roller is made up of a highly absorbent microfiber, with 64,800 filaments per cm2.
This combination of high density microfibers and consistent application of clean water ensures liquid spills are absorbed, while dry dirt, debris, and hair is enveloped by the millions of filaments.
By positioning two rollers at the front and back of the machine, Dyson engineers also achieved longer dwell time on stains with each pass, for powerful and fast stain removal.

Dyson WashG1 (Ultra Blue/Matte Black) wet floor cleaner

Dyson WashG1 (Ultra Blue/Matte Black) wet floor cleaner Pioneering separation technology for easy maintenance
Dyson’s unique separation technology divides debris and dirty water at source, for hygienic, no-touch disposal. Dirty water is extracted from the rollers by durable extraction plates, while secondary nylon-bristled inner brush bars remove dirt and debris from the microfiber rollers, flicking it straight into a removeable debris tray.
The debris tray has been designed with a 500-micron mesh to separate dirty water from the large debris.
Powered by an extraction pump, dirty water is immediately collected in a 27 oz. capacity dirty water tank, without allowing large debris to pass through the machine.
Keeping the dirt and debris in the head of the machine, and the dirty water in a separate tank allows for easy and hygienic disposal.
To further support ease-of-maintenance for users, the Dyson WashG1 has been intricately designed without sharp internal surfaces or crevices, to help lessen dirt or grime build up inside the machine.
Both water tanks have been designed with large openings to allow for easy maintenance and cleaning. Select components are dishwasher safe1.
After use, the self-cleaning mode saturates both rollers with clean water on the highest boost setting, flushing the entire system in preparation for the next clean.
Maneuverability and edge-to-edge cleaning
The rollers span the full width of the cleaner head to allow for edge-to-edge cleaning, right to the corners. The Dyson WashG1 has been designed with two motors that sit within each microfiber roller, spinning in opposite directions so they clean in both directions.
For optimized maneuverability, Dyson engineers fine-tuned each motor to spin at a consistent speed in accordance with the hydration mode selected,
allowing the machine to glide effortlessly while cleaning is in process. Adopting technology from the Dyson Omni-glide, casters provide additional balance and weight support, while the low cleaner head height allows for easy reach underneath furniture.


Customized hydration control for an optimum floor finish
The Dyson WashG1 has been designed with in-use hydration control, allowing owners to select the level of hydration required based on debris type, flooring, or personal preference.
The low, medium, and high modes each run continuously once selected, to provide increased levels of hydration respectively.
Each mode also features an additional three sensitivity settings, to allow owners to fine tune them to their individual cleaning needs.
A separate boost mode button purges each roller with the maximum amount of hydration when pressed, for removal of stubborn dirt and dried on stains.
In the box

Dyson WashG1™ wet cleaner
Charging dockPlace your wet cleaner on the charging dock for recharging or self cleaning.
ChargerCharges your wet cleaner with or without the Charging dock.
Extra microfibre rollers
































Reviews
There are no reviews yet.